E30 series BMW 3

since 1983-1994 of release

Repair and car operation



E30 BMW
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmissions
+ 9. Coupling
+ 10. Brake system
+ 11. Running gear
+ 12. Body
+ 13. Electric equipment
- 14. Good advice
   14.2. Changed numbers
   14.3. Purchase of the old car or mysterious set of figures and letters
   14.4. Durability of the car
   14.5. About parallelism of bridges of the car and the trailer
   14.6. Preparation of the car for winter
   14.7. Rule 35
   14.8. Choice of the second-hand car
   14.9. Engine oils
   14.10. That it is necessary to know, changing oil
   14.11. Emergence in deposit oil
   14.12 whether. It is possible to mix import oils?
   14.13. "Eats" much, but silently goes
   14.14. It is rather live, than it is dead …
   14.15. It is not got - good advice
   14.16. Visit to car-care center
   14.17. A gear belt for a drive of the mechanism of a gazoraspredeleniye
   14.18. Wear of pistons
   14.19. Valves
   14.20. Bearings of engines
   14.21. Engine pollution
   14.22. As the conditioner works and what to do, if it failed
   14.23. Conditioner: not only "pluses", but also "minuses"
   14.24. Rules of service of the conditioner
   14.25. It is not necessary to stir antifreeze with antifreeze …
   14.26. That it is necessary to know upon purchase of the air filter
   14.27. Engine overheat
   14.28. That it is necessary to know to the owner of the car with the injector engine
   14.29. Accumulator
   14.30. Possible malfunctions of the storage battery
   14.31. What to do with the failed generator
   14.32. The belt is guilty, and we blame the generator
   14.33. Catalyst
   14.34. Rub in one - or how to save the catalyst
   14.35. Probuksovochka
   14.36. Features of operation of brake system
   14.37. Malfunctions of brake system
   14.38. Brake liquids
   14.39. ABS: natural choice
   14.40. Rims
   14.41. We update rims
   14.42. Scheme of marking of a car tire
   14.43. Metal corrosion
   14.44. Automake-up
   14.45. What creaks?
   14.46. Hatch
   14.47. Safety cushion: troubles or pleasures?
   14.48. We fit well?
   14.49. Anticreeping "immunodeficiency"
   14.50. Why headlights grow dull
   14.51. "Galogenki"
   14.52. About the correct adjustment of headlights
   14.53. Electric motor
   14.54. From change of places "composed" changes nothing?


4d3121b2





14.41. We update rims

GENERAL INFORMATION

Under a winter layer of dirt small scratches often disappear, and salt and a shchebenka spoil appearance of elegant wheels of your car.

Three factors are pernicious for aluminum disks: a metal raid from deleting of brake shoes, salt and even insignificant blows about a border of sidewalks.

Let's begin check of wheels with their thorough sink and cleaning. For aluminum disks there are special cleaners which are put with a dispersion method. It is important to consider time of influence of liquid specified on a label. If "underexpose", dirt remains on wheels. If "overdo", chemical means can damage a surface. Therefore it is important to wash away its remains a water stream. The remained pollution are removed a sponge or a brush.

On the washed-up disk all winter damages are clearly visible. For example, small scratches at edges the rims which have arisen from contact with a brovka of the sidewalk. Them it is possible заполировать a small sandpaper or by means of a drill with a grinding nozzle, and then a brush to put a varnish. With the same way eliminate small hillocks and swellings on metal. For processing of big surfaces from an aerosol ballonchik remove a wheel not to splash a brake.

1. An aluminum disk plentifully moisten with cleaning liquid from a spray.

2. Leave for some time on rubber – liquid "will eat".

3. Remove a sponge or a rag a layer of dirt and wash out a disk a strong stream of water.

4. Clear a surface a rag.

5. Remove the dirt remains from hard-to-reach spots.

6. Clean a disk a soft brush.

If disks need painting, it is necessary to release them from rubber tires, then to do all above-stated operations.

If you want to cover a disk with a protective varnish, remove previously a wheel from the car not to spoil the painted surface of metal details.