E30 BMW
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmissions
- 9. Coupling
9.2. Specifications
9.3. Coupling check
9.4. Main cylinder of coupling
9.5. Coupling pedal
9.6. The blocking switch of coupling
9.7. Working cylinder of coupling
9.8. Air removal from a coupling hydraulic actuator
9.9. Coupling details
9.10. Driveshaft
9.11. Elastic coupling
9.12. Average support
9.13. Kardannye hinges
9.14. The forward aligning plug
9.15. Driveshaft CV JOINT
9.16. Semi-axes
9.17. CV JOINTS and covers
9.18. Epiploons of a reducer of a back axis
9.19. Reducer of a back axis
9.20. Epiploon of a leading gear wheel of a reducer
+ 10. Brake system
+ 11. Running gear
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice
9.13. Kardannye hinges
| GENERAL INFORMATION |
The condition of hinges is checked by driveshaft turn when fixing flanges of a reducer or a check point shaft. At feeling люфта it is necessary to replace hinges.
Hinges change assembled with the driveshaft – this knot not folding. It is recommended to remove and hand over an old shaft for an exchange for the new.