E30 series BMW 3

since 1983-1994 of release

Repair and car operation



E30 BMW
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmissions
- 9. Coupling
   9.2. Specifications
   9.3. Coupling check
   9.4. Main cylinder of coupling
   9.5. Coupling pedal
   9.6. The blocking switch of coupling
   9.7. Working cylinder of coupling
   9.8. Air removal from a coupling hydraulic actuator
   9.9. Coupling details
   9.10. Driveshaft
   9.11. Elastic coupling
   9.12. Average support
   9.13. Kardannye hinges
   9.14. The forward aligning plug
   9.15. Driveshaft CV JOINT
   9.16. Semi-axes
   9.17. CV JOINTS and covers
   9.18. Epiploons of a reducer of a back axis
   9.19. Reducer of a back axis
   9.20. Epiploon of a leading gear wheel of a reducer
+ 10. Brake system
+ 11. Running gear
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice



9.15. Driveshaft CV JOINT

GENERAL INFORMATION

On a part of cars in a forward part of the driveshaft the CV JOINT which fastens bolts to a flange of a shaft of transmission is provided.

Replacement

PERFORMANCE ORDER
1. Remove the driveshaft, remove a collar of a cover of the hinge, get a lock ring and get the CV JOINT a stripper.
2. Beat out bolts. Put in the hinge of 80 g of greasing so that greasing came into a holder of rollers.
3. Replace laying and a cover cover.
4. Through openings in the hinge press bolts, clear and grease shlitsa of the driveshaft with fixing structure.
5. Dress a cover, establish the hinge, пристукнув through a wooden pro-rate. Replace a lock ring and a collar. Establish the driveshaft.