E30 series BMW 3

since 1983-1994 of release

Repair and car operation



E30 BMW
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engine
   - 3.1.2. Specifications
      3.1.3. Types of the repair work which is carried out without dismantle of the engine
      3.1.4. An order of installation of the piston of the 1st cylinder in VMT of a step of compression
      3.1.5. Cover of a head of cylinders
      3.1.6. A soaking-up collector
      3.1.7. Final collector
      3.1.8. Covers of a chain of a drive of a cam-shaft (M10 engine)
      3.1.9. Chain and asterisks (M10 engine)
      3.1.10. Covers of a gear belt (engines M20 and М40)
      3.1.11. Gear belt and cam-shaft asterisks (engines M20 and М40)
      3.1.12. Forward epiploons
      3.1.13. Head of cylinders
      3.1.14. Pallet
      3.1.15. Oil pump
      3.1.16. Flywheel (a leading disk)
      3.1.17. Back epiploon of the crankshaft
      3.1.18. Engine mount details
   + 3.2. Dismantle and major maintenance of the engine
   + 3.3. Engine electric equipment
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmissions
+ 9. Coupling
+ 10. Brake system
+ 11. Running gear
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice



3.1.10. Covers of a gear belt (engines M20 and М40)

Removal and installation
PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Remove the coupling and a casing of the fan of system of cooling.
3. On the M20 engine remove a radiator.
4. Remove a pulley of a belt of a drive of the fan.
5. Disconnect wires of the sensor of turn of the crankshaft which on a cover of a gear belt and take aside (if the sensor is provided).
6. On a part of cars uncover the ignition distributor.
7. Remove a begunok.
8. Remove a plastic casing of black color under a begunok.
9. Remove the bottom pulley of a belt of the fan and a pulley-uspokoitel. At an otpuskaniye peripheral fastenings of bolts of pulleys hold a key the central bolt.
10. Unscrew bolts and nuts of fastening of covers to the engine, remove at first top, then bottom covers (M20 engine).
Unscrew bolts and nuts of fastening of covers to the engine, remove at first top, then bottom covers (M40 engine).
Prevention

Track safety of directing plugs of the top bolts of a cover.


11. Assembly is carried out upside-down.