E30 series BMW 3

since 1983-1994 of release

Repair and car operation

E30 BMW
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engine
   - 3.1.2. Specifications
      3.1.3. Types of the repair work which is carried out without dismantle of the engine
      3.1.4. An order of installation of the piston of the 1st cylinder in VMT of a step of compression
      3.1.5. Cover of a head of cylinders
      3.1.6. A soaking-up collector
      3.1.7. Final collector
      3.1.8. Covers of a chain of a drive of a cam-shaft (M10 engine)
      3.1.9. Chain and asterisks (M10 engine)
      3.1.10. Covers of a gear belt (engines M20 and М40)
      3.1.11. Gear belt and cam-shaft asterisks (engines M20 and М40)
      3.1.12. Forward epiploons
      3.1.13. Head of cylinders
      3.1.14. Pallet
      3.1.15. Oil pump
      3.1.16. Flywheel (a leading disk)
      3.1.17. Back epiploon of the crankshaft
      3.1.18. Engine mount details
   + 3.2. Dismantle and major maintenance of the engine
   + 3.3. Engine electric equipment
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmissions
+ 9. Coupling
+ 10. Brake system
+ 11. Running gear
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice

3.1.18. Engine mount details

Check and replacement

PERFORMANCE ORDER

1. Will hang out the engine to unload support.
	2. Check existence on support of cracks and a rubber otsloyeniye from a metal basis.
	3. Check an inhaling of bolts of fastening of support, having shaken support the lever. If necessary lower the engine and tighten.
	4. On the M40 engine check a condition of dampers for what disconnect them and check resistance to compression and stretching.
	5. To remove a damper unscrew a bolt. To remove a support, disconnect the battery from weight, lift the car, unscrew a nut (it is specified by an arrow), raise the engine, unscrew bolts of the bottom arm and get a support. At assembly grease carving connections by fixing structure.