E30 BMW
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmissions
+ 9. Coupling
- 10. Brake system
10.2. Specifications
10.3. Anti-blocking system (ABS)
10.4. Blocks of disk brakes
10.5. Support of a disk brake
10.6. Brake disk
10.7. Blocks of drum-type brakes
10.8. Main cylinder of brakes
10.9. Vacuum amplifier of brakes
10.10. Cable (ы) hand brake
10.11. Adjustment of the hand brake
10.12. Mechanism of the hand brake
10.13. Brake pedal
10.14. Switch of a signal of braking
10.15. Hoses and lines of a hydraulic actuator of brakes
10.16. Air removal from a hydraulic actuator of brakes
+ 11. Running gear
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice
10.2. Specifications
| GENERAL INFORMATION |
| Type of brake liquid |
see subsection 2.2
|
| Disk brakes: | |
| Minimum thickness of brake shoes |
see subsection 2.1
|
| Minimum admissible thickness of a brake disk (wear limit): | |
| – lobbies | |
| • continuous disks |
10,7 mm
|
| • ventilated disks |
20,0 mm
|
| – the back |
8,0 mm
|
| The minimum thickness of a brake disk after grinding: | |
| – lobbies | |
| • continuous disks |
11,1 mm
|
| • ventilated disks |
20,4 mm
|
| – the back |
8,4 mm
|
| Parallelism (difference of two measurements) |
0,02 mm
|
| Maximum palpation of a disk |
0,2 mm
|
| * the Limiting thickness is also specified on the disk | |
| Adjusting these pedals of a brake: | |
| – adjustment of a pedal / rod vacuum amplifier (size A) |
125 mm
|
| – height of a pedal of a brake (distance from a pedal to a partition of a motor compartment): | |
| • and/m with the left wheel |
235 mm
|
| • and/m with the right wheel |
273 mm
|
| – adjustment of the switch of a signal braking (size A) |
5,0-6,0 mm
|
| Hand brake: | |
| – minimum thickness of a block of the hand brake |
1,5 mm
|
| – course of the lever of the hand brake |
5–8 clicks
|
Inhaling moments (N of m)
| Support of a forward disk brake: | |
| – directing bolts of a support |
30-35
|
| – bolts of fastening of an arm of the case of a support to a suspension bracket rack |
123
|
| Support of a back disk brake: | |
| – directing bolts of a support |
30-35
|
| – bolts of fastening of levers of a back suspension bracket on a support |
67
|
| Fastening of a brake hose to a support |
14-17
|
| Nuts of fastening of the main cylinder to the vacuum amplifier |
22-24
|
| Bolts of fastening of wheels |
see subsection 2.1
|