E30 series BMW 3

since 1983-1994 of release

Repair and car operation

E30 BMW
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmissions
+ 9. Coupling
+ 10. Brake system
- 11. Running gear
   11.1.10. Back springs
   11.1.11. Bar of the back stabilizer of cross-section stability
   11.1.12. Levers of a back suspension bracket
   11.1.13. Bearings of back wheels
   11.1.14. Corners of installation of wheels
   11.1.2. Specifications
   11.1.3. Stabilizer of cross-section stability of a forward suspension bracket
   11.1.4. Suspension bracket lever
   11.1.5. Rack of a forward suspension bracket
   11.1.6. Springs or shock-absorber of a rack of a suspension bracket
   11.1.7. Spherical support
   11.1.8. Nave of a forward wheel and bearing
   11.1.9. Back shock-absorbers
   - 11.2. Steering
      11.2.2. Tips of helmsmen ятг
      11.2.3. Covers of the steering mechanism
      11.2.4. Steering mechanism
      11.2.5. Pump of the hydraulic booster
      11.2.6. Air removal from the power steering
      11.2.7. Steering wheel
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice

11.2.5. Pump of the hydraulic booster

Removal and installation

PERFORMANCE ORDER

1. Lift the car and remove the bottom guard of the engine.
2. Disconnect a return hose of the hydraulic booster from a tank and merge liquid, disconnect from the pump a pressure head hose.
3. If it is necessary to remove a pulley from the pump, compress a belt of a drive and unscrew pulley bolts.
4. Release a bolt of a natyazhitel of a belt, weaken a belt and remove.

5. Unscrew bolts of fastening and remove the pump.
6. Installation is carried out upside-down. Upon termination of adjust a belt tension.
7. Fill in liquid and remove air from the power steering highway.