E30 series BMW 3

since 1983-1994 of release

Repair and car operation



E30 BMW
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmissions
+ 9. Coupling
+ 10. Brake system
- 11. Running gear
   11.1.10. Back springs
   11.1.11. Bar of the back stabilizer of cross-section stability
   11.1.12. Levers of a back suspension bracket
   11.1.13. Bearings of back wheels
   11.1.14. Corners of installation of wheels
   11.1.2. Specifications
   11.1.3. Stabilizer of cross-section stability of a forward suspension bracket
   11.1.4. Suspension bracket lever
   11.1.5. Rack of a forward suspension bracket
   11.1.6. Springs or shock-absorber of a rack of a suspension bracket
   11.1.7. Spherical support
   11.1.8. Nave of a forward wheel and bearing
   11.1.9. Back shock-absorbers
   + 11.2. Steering
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice


4d3121b2





11.1.7. Spherical support

GENERAL INFORMATION

Prevention

On each lever of a suspension bracket it is provided on 2 support.


Check and replacement

PERFORMANCE ORDER
1. Lift the car.
2. Check a condition of covers of support. At detection on covers of anguishes, cuts or leakages of greasing the lever assembled with support replace. Support separately in the spare part are not delivered.
3. Check wear of spherical support, having shaken the lever the mount inserted between the lever and a cross-piece (or a rotary fist). At detection люфта the lever is subject to replacement.
4. If when rocking wheel in the vertical plane it is felt appreciable люфт in a place of a nut of a finger of a support, the reason is wear of a finger or opening expansion under a finger in the lever or in a rotary fist. In this case it is necessary to replace both the lever with support, and a cross-piece or a rotary fist.