4d3121b2

E30 series BMW 3

since 1983-1994 of release

Repair and car operation



E30 BMW
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
- 8. Transmissions
   + 8.1.2. Specifications
   - 8.2. Automatic transmission
      8.2.2. Specifications
      8.2.3. Diagnostics of automatic transmission
      8.2.4. Draft of the selector of transmission
      8.2.5. Kick-down-mode cable
      8.2.6. The blocking switch / switch of a signal of a backing
      8.2.7. Removal and transmission installation
      8.2.8. Epiploons of automatic transmission
      8.2.9. "Machine gun"
+ 9. Coupling
+ 10. Brake system
+ 11. Running gear
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice



8.2.2. Specifications

GENERAL INFORMATION

Data for adjustment of a cable of a kick-down-mode

Distance between the limiter and the plug of a cover of a cable:
  – Idling
0,50 (±0,25) mm
  – A pedal in the situation corresponding to inclusion of a kick-down-mode
not less than 44,0 mm

Inhaling moments (N of m)

Bolts of fastening of transmission to the engine (with a 6-faced head):
  – М8
24
  – М10
45
  – М12
82

Bolts of fastening of transmission to the engine (with an internal 6-faced head):

  – М8
21
  – М10
42
  – М12
63
Fastening of a back support of transmission to a body
21
Bolts of fastening of the hydrotransformer to a leading disk
37
М8
26
М10
49
Bolts of fastening of an intensifying plate
23
Nut of a flange of a check point
100
Inhaling of unions of tubes of a cooler of transmission liquid on a check point case
35
Branch pipe inhaling for filling by liquid on the pallet:
  – 3HP 22 transmission
100-110
  – Transmission of 4HP of 22 N / EN
98
  – Drain stopper of the pallet
16