1. Remove the internal panel of a door. Disconnect sockets and lay in a door framework. |
|
2. Outline contours of loops, remove a lock ring (shooter), get an axis and disconnect the limiter of an otryvaniye of a door. On a part of cars the limiter fastens a pin which should be beaten out. |
|
3. Unscrew nuts of loops (arrow) and remove a door. |
4. Installation is carried out upside-down. |
5. Adjust a door. In the directions up-down and forward-back the door is regulated by moving at the released nuts of fastening of loops to a body. |
|
6. In the last turn the provision of a clamp of the lock by moving is regulated at the released bolts (arrow). |