E30 series BMW 3

since 1983-1994 of release

Repair and car operation



E30 BMW
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engine
   + 3.1.2. Specifications
   + 3.2. Dismantle and major maintenance of the engine
   - 3.3. Engine electric equipment
      3.3.2. Specifications
      3.3.3. The battery - engine start-up in emergency situations
      3.3.4. Removal and battery installation
      3.3.5. Power cables
      + 3.3.6. Ignition system
      - 3.3.7. System of a charge of the battery
         3.3.7.2. Check of system of a charge of the battery
         3.3.7.3. Generator
         3.3.7.4. Tension regulator
         3.3.7.5. Brushes
      + 3.3.8. System of start-up of the engine
      3.3.9. Malfunctions of the generator
      3.3.10. Main malfunctions of electric equipment
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmissions
+ 9. Coupling
+ 10. Brake system
+ 11. Running gear
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice


4d3121b2 ЛаминированнаяМДФ лмдф, ламинированнаямдф лмдф.



3.3.7.4. Tension regulator

GENERAL INFORMATION

Motorola firm generator

1. Bearing
2. Cover
3. Holder of the rectifier
4. Regulator
5. Shchetkoderzhatel
6. Case of a shchetkoderzhatel
7. Ring
8. Stator
9. Nut
10. Forward cover
11. Bearing
12. Rotor
D + – the Condenser

The tension regulator is not subject to repair.

Check of a regulator of tension is carried out in car-care center.

Replacement

PERFORMANCE ORDER
1. Disconnect the battery from weight.
Bosch firm generator

2. The regulator is mounted on the generator case. Unscrew screws and remove a regulator (unscrew nuts, remove the small casing closing conclusions, unscrew nuts and uncover). Keep in mind that on a part of generators of Bosch firm the regulator is mounted in shchetochny knot.

3. Installation is carried out upside-down. Check a condition of contact rings.
Motorola firm generator
4. Remove the generator.
5. Remove a back cover, the holder of the rectifier, unscrew screws and remove a regulator.
6. Installation is carried out upside-down.