E30 series BMW 3

since 1983-1994 of release

Repair and car operation



E30 BMW
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling system
- 5. Heating and ventilation
   + 5.1.2. Heater and conditioner fan
   - 5.2. Central air
      5.2.2. Care of central air
      5.2.3. Compressor
      5.2.4. Condenser
      5.2.5. Moisture separator
      5.2.6. Conditioner evaporator
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmissions
+ 9. Coupling
+ 10. Brake system
+ 11. Running gear
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice



5.2.4. Condenser

GENERAL INFORMATION

Prevention

Together with the condenser the moisture separator changes also.


PERFORMANCE ORDER
1. Depressurize the conditioner and remove a coolant in car-care center.
2. Remove a radiator (see subsection 4.5) and a forward facing lattice (see subsection 12.7).
3. Unscrew bolts of fastening of the auxiliary fan to an arm of the condenser and disconnect from the tube condenser.
4. Unscrew bolts of fastening and get the condenser. Store the condenser unions up.
5. Installation is carried out upside-down.