E30 BMW
+ 1. Maintenance instruction
- 2. Maintenance
2.2. Recommended lubricants and liquids
2.3. Periodicity of service
2.4. Features of routine maintenance of the car
2.5. General information on additional maintenance
2.6. Check of level of liquids
2.7. Check of a condition of tires and pressure in tires
2.8. Oil replacement in the engine and the oil filter
2.9. Check and restoration of level of liquid in a wheel
2.10. Check of level of liquid in automatic transmission
2.11. Shift of wheels
2.12. Check and replacement of hoses in a motor compartment
2.13. Check, adjustment and replacement of belts of a drive of hinged units
2.14. Check and adjustment of turns and quality of a mix (FROM) idling
2.15. Check of a condition and battery charging
2.16. Check and replacement of candles
2.17. Check of high-voltage wires, begunka and distributor covers
2.18. Check of level of oil in a manual transmission
2.19. Check of level of oil in the main transfer
2.20. Check and adjustment of gaps in valves (except the M40 engine)
2.21. Draft of a butterfly valve
2.22. Replacement of the air filter
2.23. Check of fuel system
2.24. Check of system of cooling
2.25. Check of an exhaust system
2.26. Check of shock-absorbers, suspension bracket and steering
2.27. Check of covers of semi-axes
2.28. Check of brakes
2.29. Check of brushes of screen wipers
2.30. Liquid replacement in automatic transmission and the filter
2.31. Cooling system – replacement of liquid and washing
2.32. Replacement of the fuel filter
2.33. Oil replacement in a manual transmission
2.34. Oil replacement in a case of the main transfer
2.35. Check of system of catching паров gasoline (EVAP system)
2.36. Installation of the light alarm system of need of servicing
2.37. Replacement of a gear belt
+ 3. Engine
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmissions
+ 9. Coupling
+ 10. Brake system
+ 11. Running gear
+ 12. Body
+ 13. Electric equipment
+ 14. Good advice
2.27. Check of covers of semi-axes
| GENERAL INFORMATION |
|
Check a condition of a rubber cover of the external CV JOINT, having moved apart cover folds. Check existence of cracks, anguishes and signs of aging of rubber which can cause washing away of greasing and dirt and water hit in the hinge. At detection of any damages or wear signs it is necessary to replace covers (see subsection 9.17). |